Use the Diwali Shutdown to Service Your Conveyors | Neo Conveyors, Ghaziabad
If your plant shuts for Diwali, those quiet days are the best time to look at your conveyors. Nothing is running, nothing is loaded, and you can reach parts you cannot get at during a shift.

A walk-through that takes an hour or two:

Belt: check tension and tracking. Look for cracks, frayed edges and damaged joints. Clear any build-up under the belt.

Rollers: turn each one by hand. A roller that is stiff, noisy or flat-spotted will pull the belt off line sooner or later.

Gearbox and motor: oil level, leaks, mounting bolts, coupling, and dust packed around the motor fan.

Guards: every guard in place. Test the emergency stops and pull cords.

Electrics: loose terminals, dust in the panel, VFD fan and filters, damaged cable, sensors and limit switches.

Bearings: grease what needs it.

Before restart, clear the belt, run it empty and watch the tracking for a few minutes.

If you find something that needs more than a spanner, tell us before the shutdown, not after. We can look at it or supply the part.

We are closed 8th Nov 2026 to 9th Nov 2026 and back on 10th Nov 2026
Call or WhatsApp +91-9654112235
G-414, UPSIDC Phase-II, Ghaziabad

conveyor maintenance Ghaziabad
conveyor shutdown maintenance checklist
belt conveyor inspection checklist
conveyor servicing before Diwali
conveyor preventive maintenance India
conveyor repair Delhi NCR
conveyor spare parts Ghaziabad
Nov 5th, 2026 4:21 PM

Keywords